P0117 on Dodge: Symptoms, Causes & Fix
Official technical diagnostic wire for fault code P0117 specifically affecting Dodge vehicles (Charger, Challenger, Durango, Hornet, Journey).
Select Your Dodge Model for P0117:
1. Common Symptoms on Dodge Vehicles
When Dodge Engine Control Modules (ECM) trigger fault code P0117, drivers typically report:
2. Root Causes on Dodge Engines
Historical diagnostic claims across Dodge engines point to the following failure distribution:
3. Step-by-Step Fix Protocol for Dodge
Read ECT live PID on scanner. If it reads 284°F (140°C) or higher with engine cold, a short to ground exists. on Dodge engines.
Unplug sensor connector while watching live data. If temperature drops to -40°F (-40°C), the sensor itself is shorted. on Dodge engines.
If reading stays pegged at max with sensor unplugged, inspect harness for pinch points grounding against engine block. on Dodge engines.
Allow engine to cool, unscrew old ECT sensor from coolant crossover pipe or thermostat housing, install new OEM sensor with fresh thread sealant. on Dodge engines.
Bleed air from cooling system, clear DTCs, and verify normal temperature rise on live data. on Dodge engines.
Equipment for Diagnosing Dodge (P0117)
VVT Oil Control Solenoid Valve
Restores accurate camshaft timing and oil pressure regulation on Dodge.
AstroAI Auto-Ranging Digital Multimeter
Essential for testing 0.1V–5.0V sensor reference signals, ground continuity (<0.20Ω), and harness resistance.
BlueDriver Bluetooth Pro OBDII Scan Tool
Reads and clears enhanced codes (ABS, Airbag, Transmission, Engine) & live freeze-frame telemetry on phone.
4. Dodge P0117 Frequently Asked Questions
What does code P0117 mean on a Dodge?
On Dodge vehicles, P0117 indicates that the Engine Control Module (ECM) detected engine coolant temperature sensor 1 circuit low. This typically points to ECT sensor internal short to ground or Short circuit to ground in ECT signal wiring harness.
Can I continue driving my Dodge with code P0117?
No. The ECU thinks the engine is at 280°F+ (overheating) and runs rich or disables cooling fan logic. Because this code carries a High severity rating on Dodge powertrains, we recommend scanning live data values promptly to prevent secondary damage.
How much does it cost to fix code P0117 on a Dodge?
Estimated DIY parts cost ranges from $80 - $250 (DIY: $20 - $60), while professional shop repairs at an authorized Dodge dealership or independent specialist typically range from $180 to $380 including diagnostic labor.