P0137 on Nissan Altima
Factory diagnostic protocol and troubleshooting wire for fault code P0137 specifically for the Nissan Altima (2020–2026, 2.5L 4-Cyl (188HP) / 2.0L Variable Compression Turbo (248HP)).
1. Symptoms of P0137 on Nissan Altima
When the Engine Control Module (ECM/PCM) on your Nissan Altima (2.5L 4-Cyl (188HP) / 2.0L Variable Compression Turbo (248HP)) logs fault code P0137, drivers commonly observe:
2. Most Likely Causes on Nissan Altima
Historical warranty claims and technical repair bulletins for Nissan Altima point to the following failure distribution:
3. Step-by-Step DIY Repair Guide for Nissan Altima
Listen for exhaust ticking or black soot around flex pipe, flanges, and sensor bungs before the catalytic converter. on the Nissan Altima equipped with 2.5L 4-Cyl (188HP) / 2.0L Variable Compression Turbo (248HP).
Monitor B1S2 voltage. Snap the throttle to enrich mixture; voltage should briefly spike above 0.8V. If it remains 0.0V–0.1V, sensor is defective or shorted. on the Nissan Altima equipped with 2.5L 4-Cyl (188HP) / 2.0L Variable Compression Turbo (248HP).
Unplug harness, remove old sensor with 7/8 socket, install replacement sensor and plug firmly. on the Nissan Altima equipped with 2.5L 4-Cyl (188HP) / 2.0L Variable Compression Turbo (248HP).
Clear DTCs and verify B1S2 holds steady between 0.45V and 0.75V during steady highway cruising. on the Nissan Altima equipped with 2.5L 4-Cyl (188HP) / 2.0L Variable Compression Turbo (248HP).
Equipment for Diagnosing Nissan Altima (P0137)
Nissan Altima OEM Replacement Sensor
Direct-fit replacement assembly engineered to OEM tolerances for Nissan Altima.
AstroAI Auto-Ranging Digital Multimeter
Essential for testing 0.1V–5.0V sensor reference signals, ground continuity (<0.20Ω), and harness resistance.
BlueDriver Bluetooth Pro OBDII Scan Tool
Reads and clears enhanced codes (ABS, Airbag, Transmission, Engine) & live freeze-frame telemetry on phone.
Other Common Fault Codes on Nissan Altima
Frequently diagnosed powertrain, emissions, and sensor trouble codes logged on the Nissan Altima:
4. Nissan Altima P0137 FAQs
What causes code P0137 to trigger on a Nissan Altima?
On the Nissan Altima (2.5L 4-Cyl (188HP) / 2.0L Variable Compression Turbo (248HP)), P0137 is most frequently caused by Exhaust leak upstream of or directly at the Sensor 2 bung letting in fresh air or Faulty downstream oxygen sensor.
Where is the OBD-II port located on my Nissan Altima?
On the Nissan Altima, the 16-pin DLC diagnostic connector is located Under driver side dashboard to the right of hood release. Plug in any standard OBD-II scanner with the ignition in the ON position to read freeze-frame parameters.
Can I safely drive my Nissan Altima with code P0137?
Yes. Vehicle is fully drivable, but Check Engine Light will remain illuminated. Given that P0137 carries a Low severity rating, we advise avoiding heavy towing or aggressive throttle inputs until sensor readings are verified.