P0300 on Lexus RX: Fix & DLC Location
Factory diagnostic troubleshooting wire for fault code P0300 (P0300: Random or Multiple Cylinder Misfire Detected) specifically on the Lexus RX (2020–2026, 2.4L Turbo (RX 350 275HP) / 2.5L Hybrid / 2.4L Turbo Performance Hybrid (RX 500h 366HP)).
1. Symptoms of P0300 on Lexus RX
When the Engine Control Module (ECM/PCM) on your Lexus RX (2.4L Turbo (RX 350 275HP) / 2.5L Hybrid / 2.4L Turbo Performance Hybrid (RX 500h 366HP)) logs fault code P0300, drivers commonly observe:
2. Most Likely Causes on Lexus RX
Historical warranty claims and technical repair bulletins for Lexus RX point to the following failure distribution:
3. Step-by-Step DIY Repair Guide for Lexus RX
Plug a handheld OBD-II scanner into the 16-pin port under the dashboard. Check if specific cylinder codes like P0301 (Cylinder 1) or P0304 (Cylinder 4) accompany P0300. on the Lexus RX equipped with 2.4L Turbo (RX 350 275HP) / 2.5L Hybrid / 2.4L Turbo Performance Hybrid (RX 500h 366HP).
Remove the ignition coils, use a spark plug socket with ratchet to unthread spark plugs. Inspect electrode tips for carbon buildup, oil fouling, or burnt gaps. Replace with OEM iridium plugs gapped to spec. on the Lexus RX equipped with 2.4L Turbo (RX 350 275HP) / 2.5L Hybrid / 2.4L Turbo Performance Hybrid (RX 500h 366HP).
Perform an ignition swap test: Swap coil from a suspected misfiring cylinder to an adjacent cylinder. Clear codes and re-scan. If the misfire moves, replace the faulty coil. on the Lexus RX equipped with 2.4L Turbo (RX 350 275HP) / 2.5L Hybrid / 2.4L Turbo Performance Hybrid (RX 500h 366HP).
Inspect PCV hoses, intake boot, and vacuum lines for cracking or hissing sounds while engine idles. Smoke test the intake if necessary. on the Lexus RX equipped with 2.4L Turbo (RX 350 275HP) / 2.5L Hybrid / 2.4L Turbo Performance Hybrid (RX 500h 366HP).
Add a bottle of premium fuel injector cleaner (e.g. Chevron Techron). Clear the OBD-II codes with your scanner and take the car on a 15-minute drive cycle to confirm readiness monitors reset. on the Lexus RX equipped with 2.4L Turbo (RX 350 275HP) / 2.5L Hybrid / 2.4L Turbo Performance Hybrid (RX 500h 366HP).
Other Common Fault Codes on Lexus RX
Frequently diagnosed powertrain, emissions, and sensor trouble codes logged on the Lexus RX:
4. Lexus RX P0300 FAQs
What causes code P0300 to trigger on a Lexus RX?
On the Lexus RX (2.4L Turbo (RX 350 275HP) / 2.5L Hybrid / 2.4L Turbo Performance Hybrid (RX 500h 366HP)), P0300 is most frequently caused by Worn or fouled spark plugs and damaged spark plug wires or Failing ignition coils or coil packs.
Where is the OBD-II port located on my Lexus RX?
On the Lexus RX, the 16-pin DLC diagnostic connector is located Driver footwell above brake pedal assembly. Plug in any standard OBD-II scanner with the ignition in the ON position to read freeze-frame parameters.
Can I safely drive my Lexus RX with code P0300?
No. Driving with a flashing check engine light causes irreversible catalytic converter damage. Given that P0300 carries a Critical severity rating, we advise avoiding heavy towing or aggressive throttle inputs until sensor readings are verified.