P0300 on Lexus NX: Fix & DLC Location
Factory diagnostic troubleshooting wire for fault code P0300 (P0300: Random or Multiple Cylinder Misfire Detected) specifically on the Lexus NX (2022–2026, 2.5L 4-Cyl / 2.4L Turbo (275HP) / 2.5L Hybrid (NX 350h) / PHEV (NX 450h+ 304HP)).
1. Symptoms of P0300 on Lexus NX
When the Engine Control Module (ECM/PCM) on your Lexus NX (2.5L 4-Cyl / 2.4L Turbo (275HP) / 2.5L Hybrid (NX 350h) / PHEV (NX 450h+ 304HP)) logs fault code P0300, drivers commonly observe:
2. Most Likely Causes on Lexus NX
Historical warranty claims and technical repair bulletins for Lexus NX point to the following failure distribution:
3. Step-by-Step DIY Repair Guide for Lexus NX
Plug a handheld OBD-II scanner into the 16-pin port under the dashboard. Check if specific cylinder codes like P0301 (Cylinder 1) or P0304 (Cylinder 4) accompany P0300. on the Lexus NX equipped with 2.5L 4-Cyl / 2.4L Turbo (275HP) / 2.5L Hybrid (NX 350h) / PHEV (NX 450h+ 304HP).
Remove the ignition coils, use a spark plug socket with ratchet to unthread spark plugs. Inspect electrode tips for carbon buildup, oil fouling, or burnt gaps. Replace with OEM iridium plugs gapped to spec. on the Lexus NX equipped with 2.5L 4-Cyl / 2.4L Turbo (275HP) / 2.5L Hybrid (NX 350h) / PHEV (NX 450h+ 304HP).
Perform an ignition swap test: Swap coil from a suspected misfiring cylinder to an adjacent cylinder. Clear codes and re-scan. If the misfire moves, replace the faulty coil. on the Lexus NX equipped with 2.5L 4-Cyl / 2.4L Turbo (275HP) / 2.5L Hybrid (NX 350h) / PHEV (NX 450h+ 304HP).
Inspect PCV hoses, intake boot, and vacuum lines for cracking or hissing sounds while engine idles. Smoke test the intake if necessary. on the Lexus NX equipped with 2.5L 4-Cyl / 2.4L Turbo (275HP) / 2.5L Hybrid (NX 350h) / PHEV (NX 450h+ 304HP).
Add a bottle of premium fuel injector cleaner (e.g. Chevron Techron). Clear the OBD-II codes with your scanner and take the car on a 15-minute drive cycle to confirm readiness monitors reset. on the Lexus NX equipped with 2.5L 4-Cyl / 2.4L Turbo (275HP) / 2.5L Hybrid (NX 350h) / PHEV (NX 450h+ 304HP).
Other Common Fault Codes on Lexus NX
Frequently diagnosed powertrain, emissions, and sensor trouble codes logged on the Lexus NX:
4. Lexus NX P0300 FAQs
What causes code P0300 to trigger on a Lexus NX?
On the Lexus NX (2.5L 4-Cyl / 2.4L Turbo (275HP) / 2.5L Hybrid (NX 350h) / PHEV (NX 450h+ 304HP)), P0300 is most frequently caused by Worn or fouled spark plugs and damaged spark plug wires or Failing ignition coils or coil packs.
Where is the OBD-II port located on my Lexus NX?
On the Lexus NX, the 16-pin DLC diagnostic connector is located Under driver dash near footwell illumination lamp. Plug in any standard OBD-II scanner with the ignition in the ON position to read freeze-frame parameters.
Can I safely drive my Lexus NX with code P0300?
No. Driving with a flashing check engine light causes irreversible catalytic converter damage. Given that P0300 carries a Critical severity rating, we advise avoiding heavy towing or aggressive throttle inputs until sensor readings are verified.