P0204 on Jeep Compass
Factory diagnostic protocol and troubleshooting wire for fault code P0204 specifically for the Jeep Compass (2021–2026, 2.0L MultiAir Turbo 4-Cyl (177HP) / 1.3L Turbo 4xe PHEV (240HP)).
1. Symptoms of P0204 on Jeep Compass
When the Engine Control Module (ECM/PCM) on your Jeep Compass (2.0L MultiAir Turbo 4-Cyl (177HP) / 1.3L Turbo 4xe PHEV (240HP)) logs fault code P0204, drivers commonly observe:
2. Most Likely Causes on Jeep Compass
Historical warranty claims and technical repair bulletins for Jeep Compass point to the following failure distribution:
3. Step-by-Step DIY Repair Guide for Jeep Compass
Measure resistance across pins (12–16 ohms). on the Jeep Compass equipped with 2.0L MultiAir Turbo 4-Cyl (177HP) / 1.3L Turbo 4xe PHEV (240HP).
Check that ECM pulse reaches the connector. on the Jeep Compass equipped with 2.0L MultiAir Turbo 4-Cyl (177HP) / 1.3L Turbo 4xe PHEV (240HP).
Replace the faulty injector with OEM unit. on the Jeep Compass equipped with 2.0L MultiAir Turbo 4-Cyl (177HP) / 1.3L Turbo 4xe PHEV (240HP).
Clear DTC memory and confirm smooth operation. on the Jeep Compass equipped with 2.0L MultiAir Turbo 4-Cyl (177HP) / 1.3L Turbo 4xe PHEV (240HP).
Equipment for Diagnosing Jeep Compass (P0204)
Jeep Compass OEM Replacement Sensor
Direct-fit replacement assembly engineered to OEM tolerances for Jeep Compass.
AstroAI Auto-Ranging Digital Multimeter
Essential for testing 0.1V–5.0V sensor reference signals, ground continuity (<0.20Ω), and harness resistance.
BlueDriver Bluetooth Pro OBDII Scan Tool
Reads and clears enhanced codes (ABS, Airbag, Transmission, Engine) & live freeze-frame telemetry on phone.
Other Common Fault Codes on Jeep Compass
Frequently diagnosed powertrain, emissions, and sensor trouble codes logged on the Jeep Compass:
4. Jeep Compass P0204 FAQs
What causes code P0204 to trigger on a Jeep Compass?
On the Jeep Compass (2.0L MultiAir Turbo 4-Cyl (177HP) / 1.3L Turbo 4xe PHEV (240HP)), P0204 is most frequently caused by Faulty Cylinder 4 fuel injector or Broken wiring harness.
Where is the OBD-II port located on my Jeep Compass?
On the Jeep Compass, the 16-pin DLC diagnostic connector is located Driver lower dash near hood lever assembly. Plug in any standard OBD-II scanner with the ignition in the ON position to read freeze-frame parameters.
Can I safely drive my Jeep Compass with code P0204?
No. Cylinder 4 is disabled, causing rough running and unburned fuel delivery issues. Given that P0204 carries a Critical severity rating, we advise avoiding heavy towing or aggressive throttle inputs until sensor readings are verified.