P0137 on Dodge: Symptoms, Causes & Fix
Official technical diagnostic wire for fault code P0137 specifically affecting Dodge vehicles (Charger, Challenger, Durango, Hornet, Journey).
Select Your Dodge Model for P0137:
1. Common Symptoms on Dodge Vehicles
When Dodge Engine Control Modules (ECM) trigger fault code P0137, drivers typically report:
2. Root Causes on Dodge Engines
Historical diagnostic claims across Dodge engines point to the following failure distribution:
3. Step-by-Step Fix Protocol for Dodge
Listen for exhaust ticking or black soot around flex pipe, flanges, and sensor bungs before the catalytic converter. on Dodge engines.
Monitor B1S2 voltage. Snap the throttle to enrich mixture; voltage should briefly spike above 0.8V. If it remains 0.0V–0.1V, sensor is defective or shorted. on Dodge engines.
Unplug harness, remove old sensor with 7/8 socket, install replacement sensor and plug firmly. on Dodge engines.
Clear DTCs and verify B1S2 holds steady between 0.45V and 0.75V during steady highway cruising. on Dodge engines.
Equipment for Diagnosing Dodge (P0137)
Dodge OEM Replacement Sensor
Direct-fit replacement assembly engineered to OEM tolerances for Dodge.
AstroAI Auto-Ranging Digital Multimeter
Essential for testing 0.1V–5.0V sensor reference signals, ground continuity (<0.20Ω), and harness resistance.
BlueDriver Bluetooth Pro OBDII Scan Tool
Reads and clears enhanced codes (ABS, Airbag, Transmission, Engine) & live freeze-frame telemetry on phone.
4. Dodge P0137 Frequently Asked Questions
What does code P0137 mean on a Dodge?
On Dodge vehicles, P0137 indicates that the Engine Control Module (ECM) detected o2 sensor circuit low voltage (bank 1 sensor 2). This typically points to Exhaust leak upstream of or directly at the Sensor 2 bung letting in fresh air or Faulty downstream oxygen sensor.
Can I continue driving my Dodge with code P0137?
Yes. Vehicle is fully drivable, but Check Engine Light will remain illuminated. Because this code carries a Low severity rating on Dodge powertrains, we recommend scanning live data values promptly to prevent secondary damage.
How much does it cost to fix code P0137 on a Dodge?
Estimated DIY parts cost ranges from $100 - $300 (DIY: $35 - $100), while professional shop repairs at an authorized Dodge dealership or independent specialist typically range from $180 to $380 including diagnostic labor.