P0345 on 2017 Volvo XC90
Technical troubleshooting wire for fault code P0345 specifically tailored for the 2017 Volvo XC90. Includes wiring sensor pinouts, freeze frame PID parameters, and step-by-step diagnostic tree.
Common 2017 XC90 Symptoms
- Check Engine Light on
- Hard starting
- VVT disabled on Bank 2
Likely Root Causes on 2017 XC90
- Defective Bank 2 camshaft position sensor
- Broken wiring harness
- Low oil pressure to VVT phaser
Step-by-Step Fix Protocol for 2017 Volvo XC90
Connect an OBD-II scanner to the DLC port under the driver dashboard. Record engine RPM, Short Term / Long Term Fuel Trim (STFT/LTFT), and engine coolant temperature at the moment P0345 set.
Inspect the sensor connector on the 2017 XC90 engine bay. Use a multimeter to verify reference voltage (5.0V / 12.0V) and ground continuity.
Replace the verified defective component using OEM or equivalent grade parts. Clear DTC P0345 and complete an EPA drive cycle to verify readiness monitors set to READY.
Equipment for Diagnosing 2017 Volvo XC90 (P0345)
2017 Volvo XC90 OEM Replacement Sensor
Direct-fit replacement assembly engineered to OEM tolerances for 2017 Volvo XC90.
AstroAI Auto-Ranging Digital Multimeter
Essential for testing 0.1V–5.0V sensor reference signals, ground continuity (<0.20Ω), and harness resistance.
BlueDriver Bluetooth Pro OBDII Scan Tool
Reads and clears enhanced codes (ABS, Airbag, Transmission, Engine) & live freeze-frame telemetry on phone.