P0204 on Toyota RAV4
Factory diagnostic protocol and troubleshooting wire for fault code P0204 specifically for the Toyota RAV4 (2020–2026, 2.5L 4-Cyl (A25A-FKS 203HP) / Hybrid AWD / Prime PHEV 302HP).
1. Symptoms of P0204 on Toyota RAV4
When the Engine Control Module (ECM/PCM) on your Toyota RAV4 (2.5L 4-Cyl (A25A-FKS 203HP) / Hybrid AWD / Prime PHEV 302HP) logs fault code P0204, drivers commonly observe:
2. Most Likely Causes on Toyota RAV4
Historical warranty claims and technical repair bulletins for Toyota RAV4 point to the following failure distribution:
3. Step-by-Step DIY Repair Guide for Toyota RAV4
Measure resistance across pins (12–16 ohms). on the Toyota RAV4 equipped with 2.5L 4-Cyl (A25A-FKS 203HP) / Hybrid AWD / Prime PHEV 302HP.
Check that ECM pulse reaches the connector. on the Toyota RAV4 equipped with 2.5L 4-Cyl (A25A-FKS 203HP) / Hybrid AWD / Prime PHEV 302HP.
Replace the faulty injector with OEM unit. on the Toyota RAV4 equipped with 2.5L 4-Cyl (A25A-FKS 203HP) / Hybrid AWD / Prime PHEV 302HP.
Clear DTC memory and confirm smooth operation. on the Toyota RAV4 equipped with 2.5L 4-Cyl (A25A-FKS 203HP) / Hybrid AWD / Prime PHEV 302HP.
Equipment for Diagnosing Toyota RAV4 (P0204)
Toyota RAV4 OEM Replacement Sensor
Direct-fit replacement assembly engineered to OEM tolerances for Toyota RAV4.
AstroAI Auto-Ranging Digital Multimeter
Essential for testing 0.1V–5.0V sensor reference signals, ground continuity (<0.20Ω), and harness resistance.
BlueDriver Bluetooth Pro OBDII Scan Tool
Reads and clears enhanced codes (ABS, Airbag, Transmission, Engine) & live freeze-frame telemetry on phone.
Other Common Fault Codes on Toyota RAV4
Frequently diagnosed powertrain, emissions, and sensor trouble codes logged on the Toyota RAV4:
4. Toyota RAV4 P0204 FAQs
What causes code P0204 to trigger on a Toyota RAV4?
On the Toyota RAV4 (2.5L 4-Cyl (A25A-FKS 203HP) / Hybrid AWD / Prime PHEV 302HP), P0204 is most frequently caused by Faulty Cylinder 4 fuel injector or Broken wiring harness.
Where is the OBD-II port located on my Toyota RAV4?
On the Toyota RAV4, the 16-pin DLC diagnostic connector is located Driver footwell directly above brake pedal arm. Plug in any standard OBD-II scanner with the ignition in the ON position to read freeze-frame parameters.
Can I safely drive my Toyota RAV4 with code P0204?
No. Cylinder 4 is disabled, causing rough running and unburned fuel delivery issues. Given that P0204 carries a Critical severity rating, we advise avoiding heavy towing or aggressive throttle inputs until sensor readings are verified.