P0137 on Mazda CX-90
Factory diagnostic protocol and troubleshooting wire for fault code P0137 specifically for the Mazda CX-90 (2024–2026, 3.3L Turbo I6 (340HP) / PHEV Turbo 6 (323HP) / e-Skyactiv PHEV).
1. Symptoms of P0137 on Mazda CX-90
When the Engine Control Module (ECM/PCM) on your Mazda CX-90 (3.3L Turbo I6 (340HP) / PHEV Turbo 6 (323HP) / e-Skyactiv PHEV) logs fault code P0137, drivers commonly observe:
2. Most Likely Causes on Mazda CX-90
Historical warranty claims and technical repair bulletins for Mazda CX-90 point to the following failure distribution:
3. Step-by-Step DIY Repair Guide for Mazda CX-90
Listen for exhaust ticking or black soot around flex pipe, flanges, and sensor bungs before the catalytic converter. on the Mazda CX-90 equipped with 3.3L Turbo I6 (340HP) / PHEV Turbo 6 (323HP) / e-Skyactiv PHEV.
Monitor B1S2 voltage. Snap the throttle to enrich mixture; voltage should briefly spike above 0.8V. If it remains 0.0V–0.1V, sensor is defective or shorted. on the Mazda CX-90 equipped with 3.3L Turbo I6 (340HP) / PHEV Turbo 6 (323HP) / e-Skyactiv PHEV.
Unplug harness, remove old sensor with 7/8 socket, install replacement sensor and plug firmly. on the Mazda CX-90 equipped with 3.3L Turbo I6 (340HP) / PHEV Turbo 6 (323HP) / e-Skyactiv PHEV.
Clear DTCs and verify B1S2 holds steady between 0.45V and 0.75V during steady highway cruising. on the Mazda CX-90 equipped with 3.3L Turbo I6 (340HP) / PHEV Turbo 6 (323HP) / e-Skyactiv PHEV.
Equipment for Diagnosing Mazda CX-90 (P0137)
Mazda CX-90 OEM Replacement Sensor
Direct-fit replacement assembly engineered to OEM tolerances for Mazda CX-90.
AstroAI Auto-Ranging Digital Multimeter
Essential for testing 0.1V–5.0V sensor reference signals, ground continuity (<0.20Ω), and harness resistance.
BlueDriver Bluetooth Pro OBDII Scan Tool
Reads and clears enhanced codes (ABS, Airbag, Transmission, Engine) & live freeze-frame telemetry on phone.
Other Common Fault Codes on Mazda CX-90
Frequently diagnosed powertrain, emissions, and sensor trouble codes logged on the Mazda CX-90:
4. Mazda CX-90 P0137 FAQs
What causes code P0137 to trigger on a Mazda CX-90?
On the Mazda CX-90 (3.3L Turbo I6 (340HP) / PHEV Turbo 6 (323HP) / e-Skyactiv PHEV), P0137 is most frequently caused by Exhaust leak upstream of or directly at the Sensor 2 bung letting in fresh air or Faulty downstream oxygen sensor.
Where is the OBD-II port located on my Mazda CX-90?
On the Mazda CX-90, the 16-pin DLC diagnostic connector is located Under driver lower dash trim above pedal cluster. Plug in any standard OBD-II scanner with the ignition in the ON position to read freeze-frame parameters.
Can I safely drive my Mazda CX-90 with code P0137?
Yes. Vehicle is fully drivable, but Check Engine Light will remain illuminated. Given that P0137 carries a Low severity rating, we advise avoiding heavy towing or aggressive throttle inputs until sensor readings are verified.