P0135 on Honda Civic: Fix & DLC Location
Factory diagnostic troubleshooting wire for fault code P0135 (O2 Sensor Heater Circuit Malfunction (Bank 1, Sensor 1)) specifically on the Honda Civic (2020–2026, 2.0L i-VTEC (158HP) / 1.5L Turbo (180HP) / Civic Type R (315HP) / Hybrid).
1. Symptoms of P0135 on Honda Civic
When the Engine Control Module (ECM/PCM) on your Honda Civic (2.0L i-VTEC (158HP) / 1.5L Turbo (180HP) / Civic Type R (315HP) / Hybrid) logs fault code P0135, drivers commonly observe:
2. Most Likely Causes on Honda Civic
Historical warranty claims and technical repair bulletins for Honda Civic point to the following failure distribution:
3. Step-by-Step DIY Repair Guide for Honda Civic
Locate the under-hood fuse box and test the O2 sensor heater fuse with a multimeter or test light. on the Honda Civic equipped with 2.0L i-VTEC (158HP) / 1.5L Turbo (180HP) / Civic Type R (315HP) / Hybrid.
Unplug the Bank 1 Sensor 1 connector and test resistance between the two heater pins (typically 3 to 15 ohms). on the Honda Civic equipped with 2.0L i-VTEC (158HP) / 1.5L Turbo (180HP) / Civic Type R (315HP) / Hybrid.
Use an O2 sensor socket wrench to remove the old sensor from the exhaust manifold and install an OEM-spec replacement with anti-seize on the threads. on the Honda Civic equipped with 2.0L i-VTEC (158HP) / 1.5L Turbo (180HP) / Civic Type R (315HP) / Hybrid.
Other Common Fault Codes on Honda Civic
Frequently diagnosed powertrain, emissions, and sensor trouble codes logged on the Honda Civic:
4. Honda Civic P0135 FAQs
What causes code P0135 to trigger on a Honda Civic?
On the Honda Civic (2.0L i-VTEC (158HP) / 1.5L Turbo (180HP) / Civic Type R (315HP) / Hybrid), P0135 is most frequently caused by Burnt-out internal heating element in upstream oxygen sensor or Blown O2 sensor heater fuse.
Where is the OBD-II port located on my Honda Civic?
On the Honda Civic, the 16-pin DLC diagnostic connector is located Under driver dash, right side of steering column. Plug in any standard OBD-II scanner with the ignition in the ON position to read freeze-frame parameters.
Can I safely drive my Honda Civic with code P0135?
Yes, vehicle is safe to drive, but will stay in open-loop mode longer upon startup. Given that P0135 carries a Low to Medium severity rating, we advise avoiding heavy towing or aggressive throttle inputs until sensor readings are verified.