P0137 on 2021 Dodge Hornet
Technical troubleshooting wire for fault code P0137 specifically tailored for the 2021 Dodge Hornet. Includes wiring sensor pinouts, freeze frame PID parameters, and step-by-step diagnostic tree.
Common 2021 Hornet Symptoms
- Check Engine Light on
- Downstream sensor voltage consistently below 0.15V on scan tool
- Failed emissions test
Likely Root Causes on 2021 Hornet
- Exhaust leak upstream of or directly at the Sensor 2 bung letting in fresh air
- Faulty downstream oxygen sensor
- Short to ground in sensor signal wire
- Extremely lean exhaust condition
Step-by-Step Fix Protocol for 2021 Dodge Hornet
Connect an OBD-II scanner to the DLC port under the driver dashboard. Record engine RPM, Short Term / Long Term Fuel Trim (STFT/LTFT), and engine coolant temperature at the moment P0137 set.
Inspect the sensor connector on the 2021 Hornet engine bay. Use a multimeter to verify reference voltage (5.0V / 12.0V) and ground continuity.
Replace the verified defective component using OEM or equivalent grade parts. Clear DTC P0137 and complete an EPA drive cycle to verify readiness monitors set to READY.
Equipment for Diagnosing 2021 Dodge Hornet (P0137)
2021 Dodge Hornet OEM Replacement Sensor
Direct-fit replacement assembly engineered to OEM tolerances for 2021 Dodge Hornet.
AstroAI Auto-Ranging Digital Multimeter
Essential for testing 0.1V–5.0V sensor reference signals, ground continuity (<0.20Ω), and harness resistance.
BlueDriver Bluetooth Pro OBDII Scan Tool
Reads and clears enhanced codes (ABS, Airbag, Transmission, Engine) & live freeze-frame telemetry on phone.