FTC Reader Disclosure: When you purchase or register through links on our site, we may earn an affiliate commission at no extra cost to you. Read our Editorial & Advertising Policy.

P0172 on Chevrolet Silverado: Fix & DLC Location

Factory diagnostic troubleshooting wire for fault code P0172 (System Too Rich (Bank 1) - Symptoms, Causes & Step-by-Step Fix) specifically on the Chevrolet Silverado (2020–2026, 5.3L / 6.2L EcoTec3 V8 & 2.7L Turbo / 3.0L Duramax Diesel).

Chevrolet Silverado
DIY Parts Estimate
$30 - $280 (DIY Clean: $15)
Silverado OEM Fitment
Shop Labor Quote
$180 – $380
Based on $115/hr labor
Drivability Status
Drivable (Short Trip)
Medium urgency level
Est. DIY Time
45 – 90 Min
Basic hand tools
Check P0172 On Another Chevrolet Model:
Chevrolet SilveradoChevrolet EquinoxChevrolet TahoeChevrolet Corvette

1. Symptoms of P0172 on Chevrolet Silverado

When the Engine Control Module (ECM/PCM) on your Chevrolet Silverado (5.3L / 6.2L EcoTec3 V8 & 2.7L Turbo / 3.0L Duramax Diesel) logs fault code P0172, drivers commonly observe:

Check Engine Light on on Chevrolet Silverado (5.3L / 6.2L EcoTec3 V8 & 2.7L Turbo / 3.0L Duramax Diesel)
Strong unburnt fuel odor from exhaust on Chevrolet Silverado (5.3L / 6.2L EcoTec3 V8 & 2.7L Turbo / 3.0L Duramax Diesel)
Black carbon soot around exhaust tip on Chevrolet Silverado (5.3L / 6.2L EcoTec3 V8 & 2.7L Turbo / 3.0L Duramax Diesel)
Rough idle and engine bogging under throttle on Chevrolet Silverado (5.3L / 6.2L EcoTec3 V8 & 2.7L Turbo / 3.0L Duramax Diesel)
Noticeable drop in MPG on Chevrolet Silverado (5.3L / 6.2L EcoTec3 V8 & 2.7L Turbo / 3.0L Duramax Diesel)
Chevrolet Silverado OBD-II Port Location
The 16-pin diagnostic connector is located Under driver dashboard, left of steering column. Plug in your scan tool to verify freeze-frame sensor values.

2. Most Likely Causes on Chevrolet Silverado

Historical warranty claims and technical repair bulletins for Chevrolet Silverado point to the following failure distribution:

55%
Faulty or leaking fuel injector (Chevrolet OEM Part)
25%
Contaminated Mass Air Flow (MAF) sensor (Chevrolet OEM Part)
12%
Stuck closed EVAP canister purge valve (Chevrolet OEM Part)
8%
Excessive fuel pressure regulator failure (Chevrolet OEM Part)

3. Step-by-Step DIY Repair Guide for Chevrolet Silverado

01
Clean MAF Sensor and Throttle Body

Use dedicated MAF cleaner to remove carbon buildup from sensor wires. on the Chevrolet Silverado equipped with 5.3L / 6.2L EcoTec3 V8 & 2.7L Turbo / 3.0L Duramax Diesel.

02
Check Short Term & Long Term Fuel Trims

Use live OBD-II scanner data; negative trims beyond -10% indicate the ECU is cutting fuel. on the Chevrolet Silverado equipped with 5.3L / 6.2L EcoTec3 V8 & 2.7L Turbo / 3.0L Duramax Diesel.

03
Inspect Fuel Injector Leak-Down

Perform a fuel pressure leak-down test to identify injectors leaking raw gasoline into cylinders while parked. on the Chevrolet Silverado equipped with 5.3L / 6.2L EcoTec3 V8 & 2.7L Turbo / 3.0L Duramax Diesel.

Other Common Fault Codes on Chevrolet Silverado

Frequently diagnosed powertrain, emissions, and sensor trouble codes logged on the Chevrolet Silverado:

4. Chevrolet Silverado P0172 FAQs

What causes code P0172 to trigger on a Chevrolet Silverado?

On the Chevrolet Silverado (5.3L / 6.2L EcoTec3 V8 & 2.7L Turbo / 3.0L Duramax Diesel), P0172 is most frequently caused by Faulty or leaking fuel injector or Contaminated Mass Air Flow (MAF) sensor.

Where is the OBD-II port located on my Chevrolet Silverado?

On the Chevrolet Silverado, the 16-pin DLC diagnostic connector is located Under driver dashboard, left of steering column. Plug in any standard OBD-II scanner with the ignition in the ON position to read freeze-frame parameters.

Can I safely drive my Chevrolet Silverado with code P0172?

Driveable short distances, but unburnt fuel can damage catalytic converters. Given that P0172 carries a Medium severity rating, we advise avoiding heavy towing or aggressive throttle inputs until sensor readings are verified.