MazicBay Diagnostics
MAZICBAYDiagnostics
FTC Reader Disclosure: When you purchase or register through links on our site, we may earn an affiliate commission at no extra cost to you. Read our Editorial & Advertising Policy.

P0705 on Chevrolet Equinox

Transmission Range Sensor Circuit Malfunction (PRNDL Input)

Factory diagnostic protocol and troubleshooting wire for fault code P0705 specifically for the Chevrolet Equinox (2020–2026, 1.5L Turbo 4-Cyl (LYX 175HP)).

Verified OEM Telemetry & Field Repair Tree
Chevrolet Equinox2020–2026
Chevrolet Equinox
SUV1.5L Turbo 4-Cyl (LYX 175HP)
Reliability
Sensor Voltage Ref
0.1V – 5.0V Ref
Equinox SAE Mode $01
ECU Network Bus
500 kbps CAN-FD
ISO 15765-4 Compliant
Drivability Status
Drivable (Short Trip)
High urgency level
Est. Repair Cost
$120 - $450 (DIY: $40 - $160)
Parts & Labor DIY
Check P0705 On Another Chevrolet Model:
Diagnose P0705 on Specific Equinox Model Year:

1. Symptoms of P0705 on Chevrolet Equinox

When the Engine Control Module (ECM/PCM) on your Chevrolet Equinox (1.5L Turbo 4-Cyl (LYX 175HP)) logs fault code P0705, drivers commonly observe:

Check Engine Light on on Chevrolet Equinox (1.5L Turbo 4-Cyl (LYX 175HP))
Vehicle will not crank/start in Park (starts only in Neutral) on Chevrolet Equinox (1.5L Turbo 4-Cyl (LYX 175HP))
Gear indicator on dashboard (P R N D 1 2) is blank or displays wrong gear on Chevrolet Equinox (1.5L Turbo 4-Cyl (LYX 175HP))
Transmission shifts harshly or goes into 3rd gear limp mode on Chevrolet Equinox (1.5L Turbo 4-Cyl (LYX 175HP))
Reverse backup lights fail to illuminate on Chevrolet Equinox (1.5L Turbo 4-Cyl (LYX 175HP))
Chevrolet Equinox OBD-II Port Location
The 16-pin diagnostic connector is located Driver footwell above brake arm. Plug in your scan tool to verify freeze-frame sensor values.

2. Most Likely Causes on Chevrolet Equinox

Historical warranty claims and technical repair bulletins for Chevrolet Equinox point to the following failure distribution:

55%
Misaligned or faulty Transmission Range Sensor / Neutral Safety Switch (NSS) (Chevrolet OEM Part)
25%
Corroded or water-logged connector on transmission side (Chevrolet OEM Part)
12%
Stretched or misadjusted shift linkage cable (Chevrolet OEM Part)
8%
Broken internal switch contacts (Chevrolet OEM Part)
* Source: Synthesized from NHTSA ODI field repair telemetry and verified OEM Technical Service Bulletin (TSB) repair tree frequency percentiles for Chevrolet Equinox.

3. Step-by-Step DIY Repair Guide for Chevrolet Equinox

01
Check PRNDL Live Data

Move gear selector through all positions while monitoring scan tool TR PID to see which gear positions fail to register. on the Chevrolet Equinox equipped with 1.5L Turbo 4-Cyl (LYX 175HP).

Required Tool: OBD-II Scanner
02
Inspect Shift Cable Alignment

Ensure the mechanical shift linkage fully clicks the transmission lever into the physical detent for Park and Neutral. on the Chevrolet Equinox equipped with 1.5L Turbo 4-Cyl (LYX 175HP).

Required Tool: Pliers, Socket Set
03
Test Neutral Safety Switch Continuity

Use multimeter to check continuity across switch pins in Park, Reverse, Neutral, and Drive. on the Chevrolet Equinox equipped with 1.5L Turbo 4-Cyl (LYX 175HP).

Required Tool: Digital Multimeter
04
Replace or Re-align Range Sensor

Loosen mounting bolts, use alignment pin to align sensor slot with transmission shaft in Neutral, torque bolts, or install new OEM sensor. on the Chevrolet Equinox equipped with 1.5L Turbo 4-Cyl (LYX 175HP).

Required Tool: 10mm/12mm Sockets, Alignment Pin
05
Clear Trouble Codes and Verify Starting

Clear DTCs and confirm engine starts in Park and Neutral, reverse lights activate, and gear display is accurate. on the Chevrolet Equinox equipped with 1.5L Turbo 4-Cyl (LYX 175HP).

Required Tool: OBD-II Scanner
Recommended Parts & Testing Tools

Equipment for Diagnosing Chevrolet Equinox (P0705)

Prime Fast Delivery & Verified Fitment
Direct-Fit Replacement Part

Chevrolet Equinox OEM Replacement Sensor

4.7 / 5.0 (Verified Fit)

Direct-fit replacement assembly engineered to OEM tolerances for Chevrolet Equinox.

$45 – $95 Prime
Check Fitment on Amazon
Sensor Signal Voltage Meter

AstroAI Auto-Ranging Digital Multimeter

4.6 / 5.0 (Best Seller)

Essential for testing 0.1V–5.0V sensor reference signals, ground continuity (<0.20Ω), and harness resistance.

$29.99 Prime
View on Amazon
Top Mobile OBD-II Scanner

BlueDriver Bluetooth Pro OBDII Scan Tool

4.7 / 5.0 (50,000+ Reviews)

Reads and clears enhanced codes (ABS, Airbag, Transmission, Engine) & live freeze-frame telemetry on phone.

Compare OEM & Aftermarket Replacement Sensors for Chevrolet EquinoxVerified direct-fit pricing from Denso, Bosch, Motorcraft, and ACDelco on Amazon.
Find Parts on Amazon
* As an Amazon Associate, MazicBay earns from qualifying purchases. Prices & availability subject to change.

Other Common Fault Codes on Chevrolet Equinox

Frequently diagnosed powertrain, emissions, and sensor trouble codes logged on the Chevrolet Equinox:

4. Chevrolet Equinox P0705 FAQs

What causes code P0705 to trigger on a Chevrolet Equinox?

On the Chevrolet Equinox (1.5L Turbo 4-Cyl (LYX 175HP)), P0705 is most frequently caused by Misaligned or faulty Transmission Range Sensor / Neutral Safety Switch (NSS) or Corroded or water-logged connector on transmission side.

Where is the OBD-II port located on my Chevrolet Equinox?

On the Chevrolet Equinox, the 16-pin DLC diagnostic connector is located Driver footwell above brake arm. Plug in any standard OBD-II scanner with the ignition in the ON position to read freeze-frame parameters.

Can I safely drive my Chevrolet Equinox with code P0705?

Caution. Vehicle may not start in Park, backup lights may not work, and transmission may lock in Limp Mode. Given that P0705 carries a High severity rating, we advise avoiding heavy towing or aggressive throttle inputs until sensor readings are verified.