P0744 on 2018 BMW M5
Technical troubleshooting wire for fault code P0744 specifically tailored for the 2018 BMW M5. Includes wiring sensor pinouts, freeze frame PID parameters, and step-by-step diagnostic tree.
Common 2018 M5 Symptoms
- Check Engine Light on
- RPM fluctuates on highway
- Slight shudder during lockup
Likely Root Causes on 2018 M5
- Intermittent TCC solenoid failure
- Contaminated transmission fluid
- Worn torque converter seal
Step-by-Step Fix Protocol for 2018 BMW M5
Connect an OBD-II scanner to the DLC port under the driver dashboard. Record engine RPM, Short Term / Long Term Fuel Trim (STFT/LTFT), and engine coolant temperature at the moment P0744 set.
Inspect the sensor connector on the 2018 M5 engine bay. Use a multimeter to verify reference voltage (5.0V / 12.0V) and ground continuity.
Replace the verified defective component using OEM or equivalent grade parts. Clear DTC P0744 and complete an EPA drive cycle to verify readiness monitors set to READY.
Equipment for Diagnosing 2018 BMW M5 (P0744)
2018 BMW M5 OEM Replacement Sensor
Direct-fit replacement assembly engineered to OEM tolerances for 2018 BMW M5.
AstroAI Auto-Ranging Digital Multimeter
Essential for testing 0.1V–5.0V sensor reference signals, ground continuity (<0.20Ω), and harness resistance.
BlueDriver Bluetooth Pro OBDII Scan Tool
Reads and clears enhanced codes (ABS, Airbag, Transmission, Engine) & live freeze-frame telemetry on phone.