MazicBay Diagnostics
MAZICBAYDiagnostics
NHTSA Federal Safety Recall Directory

2016 BMW M3 Safety Recalls (3)

Under the National Traffic and Motor Vehicle Safety Act, manufacturers are required to remedy safety defects and noncompliance with federal motor vehicle safety standards free of charge. Below are the verified recall campaigns for the 2016 BMW M3.

100% Free Dealer Remedy: Any authorized BMW dealership must perform recall repairs at zero cost to the vehicle owner regardless of warranty status.
Switch M3 Model Year Recalls
NHTSA ID: 18V713000Component: POWER TRAIN:DRIVELINE:DRIVESHAFT

BMW of North America, LLC (BMW) is recalling certain 2016-2017 BMW M3 Sedans, 2016-2017 BMW M4 and M4 GTS Coupes and 2017 BMW M4 Convertible vehicles. The connection between the driveshaft and the flange may fail resulting in a loss of propulsion.

Safety Consequence / Hazard

A loss of vehicle propulsion can increase the risk of a crash.

Authorized Dealer Remedy

BMW will notify vehicle owners, and dealers will replace the driveshaft, free of charge. The recall began April 9, 2019. Owners may contact BMW customer service at 1-800-525-7417.

Report Date: 11/10/2018Official NHTSA Docket
NHTSA ID: 16V653000Component: STRUCTURE:FRAME AND MEMBERS

BMW North America, LLC (BMW) is recalling certain model year 2016 BMW M2 Coupe vehicles, 2015-2017 M3 Sedan vehicles and 2015-2016 M4 Coupe and M4 Convertible vehicles. During servicing of the rear differential for a prior service action, the rear sub-frame bolts may have been reused instead of being replaced. Reuse of the existing bolts may cause the bolts to loosen.

Safety Consequence / Hazard

Loose rear sub-frame bolts may adversely affect vehicle handling and control, increasing the risk of a crash.

Authorized Dealer Remedy

BMW will notify owners, and dealers will replace the rear sub-frame bolts with new bolts, free of charge. The recall began on November 3, 2016. Owners may contact BMW customer service at 1-800-525-7417.

Report Date: 09/09/2016Official NHTSA Docket
NHTSA ID: 15V782000Component: POWER TRAIN:DRIVELINE:DRIVESHAFT

BMW of North America, LLC (BMW) is recalling certain model year 2015-2016 M3 Sedan vehicles manufactured May 30, 2015, to September 2, 2015, 2016 M4 Coupe vehicles manufactured July 3, 2015, to September 11, 2015, and 2015-2016 M4 Convertible vehicles manufactured May 29, 2015, to August 4, 2015. The affected vehicles have a driveshaft with a slip-joint that may not have been filled with grease. As a result, the slip-joint may fail over time.

Safety Consequence / Hazard

If the slip-joint fails, there would be a loss of power to the rear axle and therefore the vehicle would stop moving, increasing the risk of a crash.

Authorized Dealer Remedy

BMW will notify owners, and dealers will inspect the driveshaft, replacing it as necessary, free of charge. The recall began on January 14, 2016. Owners may contact BMW customer service at 1-800-525-7417.

Report Date: 23/11/2015Official NHTSA Docket
Check Your Specific Vehicle

Does your 2016 M3 have incomplete recalls?

Safety recalls apply to specific VIN numbers. You can check the complete 17-character VIN on the federal NHTSA portal to verify if previous owners have had these free repairs completed.

Run Free VIN Recall Check