P0120 on 2017 Audi e-tron
Technical troubleshooting wire for fault code P0120 specifically tailored for the 2017 Audi e-tron. Includes wiring sensor pinouts, freeze frame PID parameters, and step-by-step diagnostic tree.
Common 2017 e-tron Symptoms
- Check Engine Light and 'Engine Power Reduced' on
- Gas pedal does not respond
- Rough surging idle
Likely Root Causes on 2017 e-tron
- Faulty Throttle Position Sensor (TPS)
- Worn throttle body gears
- Damaged electronic throttle wiring harness
Step-by-Step Fix Protocol for 2017 Audi e-tron
Connect an OBD-II scanner to the DLC port under the driver dashboard. Record engine RPM, Short Term / Long Term Fuel Trim (STFT/LTFT), and engine coolant temperature at the moment P0120 set.
Inspect the sensor connector on the 2017 e-tron engine bay. Use a multimeter to verify reference voltage (5.0V / 12.0V) and ground continuity.
Replace the verified defective component using OEM or equivalent grade parts. Clear DTC P0120 and complete an EPA drive cycle to verify readiness monitors set to READY.
Equipment for Diagnosing 2017 Audi e-tron (P0120)
VVT Oil Control Solenoid Valve
Restores accurate camshaft timing and oil pressure regulation on 2017 Audi e-tron.
AstroAI Auto-Ranging Digital Multimeter
Essential for testing 0.1V–5.0V sensor reference signals, ground continuity (<0.20Ω), and harness resistance.
BlueDriver Bluetooth Pro OBDII Scan Tool
Reads and clears enhanced codes (ABS, Airbag, Transmission, Engine) & live freeze-frame telemetry on phone.