MazicBay Diagnostics
MAZICBAYDiagnostics
FTC Reader Disclosure: When you purchase or register through links on our site, we may earn an affiliate commission at no extra cost to you. Read our Editorial & Advertising Policy.
P0420AcuraAcura TLX HubAll Acura P0420Medium Severity

P0420 on Acura TLX

Catalyst System Efficiency Below Threshold (Bank 1)

Factory diagnostic protocol and troubleshooting wire for fault code P0420 specifically for the Acura TLX (2021–2026, 2.0L Turbo (272HP) / Type S 3.0L Turbo V6 (355HP SH-AWD)).

Verified OEM Telemetry & Field Repair Tree
Acura TLX2021–2026
Acura TLX
Sedan2.0L Turbo (272HP) / Type S 3.0L Turbo V6 (355HP SH-AWD)
Reliability
Sensor Voltage Ref
0.1V – 5.0V Ref
TLX SAE Mode $01
ECU Network Bus
500 kbps CAN-FD
ISO 15765-4 Compliant
Drivability Status
Drivable (Short Trip)
Medium urgency level
Est. Repair Cost
$400 - $1,800 (DIY: $150 - $400)
Parts & Labor DIY
Check P0420 On Another Acura Model:
Diagnose P0420 on Specific TLX Model Year:

1. Symptoms of P0420 on Acura TLX

When the Engine Control Module (ECM/PCM) on your Acura TLX (2.0L Turbo (272HP) / Type S 3.0L Turbo V6 (355HP SH-AWD)) logs fault code P0420, drivers commonly observe:

Illuminated Check Engine Light (steady) on Acura TLX (2.0L Turbo (272HP) / Type S 3.0L Turbo V6 (355HP SH-AWD))
Rotten egg / sulfur odor from exhaust on Acura TLX (2.0L Turbo (272HP) / Type S 3.0L Turbo V6 (355HP SH-AWD))
Slight decrease in fuel efficiency and sluggish highway passing power on Acura TLX (2.0L Turbo (272HP) / Type S 3.0L Turbo V6 (355HP SH-AWD))
Vehicle fails state OBD-II emissions smog test on Acura TLX (2.0L Turbo (272HP) / Type S 3.0L Turbo V6 (355HP SH-AWD))
Acura TLX OBD-II Port Location
The 16-pin diagnostic connector is located Driver footwell below steering column. Plug in your scan tool to verify freeze-frame sensor values.

2. Most Likely Causes on Acura TLX

Historical warranty claims and technical repair bulletins for Acura TLX point to the following failure distribution:

55%
Catalytic converter internal substrate degraded or melted (Acura OEM Part)
25%
Faulty Downstream Oxygen Sensor (O2 Sensor Bank 1 Sensor 2) (Acura OEM Part)
12%
Exhaust leak upstream of the catalytic converter (Acura OEM Part)
8%
Engine burning oil or coolant contaminating the catalyst (Acura OEM Part)
* Source: Synthesized from NHTSA ODI field repair telemetry and verified OEM Technical Service Bulletin (TSB) repair tree frequency percentiles for Acura TLX.

3. Step-by-Step DIY Repair Guide for Acura TLX

01
Check Live O2 Sensor Voltage Data

Use a live-data scan tool. Downstream O2 sensor should show a steady voltage around 0.45V to 0.7V. If it fluctuates rapidly between 0.1V and 0.9V like the upstream sensor, the cat is not storing oxygen. on the Acura TLX equipped with 2.0L Turbo (272HP) / Type S 3.0L Turbo V6 (355HP SH-AWD).

Required Tool: OBD-II Live Scanner
02
Inspect Exhaust Pipes for Upstream Leaks

Check exhaust manifold gaskets and flex pipes before the catalytic converter. Extra air entering exhaust false-triggers the P0420 code. on the Acura TLX equipped with 2.0L Turbo (272HP) / Type S 3.0L Turbo V6 (355HP SH-AWD).

Required Tool: Jack stands, Flashlight, Soapy water spray
03
Test and Replace Downstream O2 Sensor

If the sensor is sluggish or older than 100,000 miles, replace the downstream oxygen sensor first before condemning the expensive catalytic converter. on the Acura TLX equipped with 2.0L Turbo (272HP) / Type S 3.0L Turbo V6 (355HP SH-AWD).

Required Tool: 22mm O2 Sensor Socket, Penetrating oil
04
Try Catalytic Converter Cleaner Solution

Pour a designated catalytic cleaner (e.g. Cataclean) into 1/4 tank of fuel and drive 50 miles on the highway to burn off surface carbon deposits. on the Acura TLX equipped with 2.0L Turbo (272HP) / Type S 3.0L Turbo V6 (355HP SH-AWD).

Required Tool: Cataclean fuel treatment
05
Replace Catalytic Converter Assembly

If codes return after sensor replacement and cleaning, replace the catalytic converter with an EPA or CARB compliant unit. on the Acura TLX equipped with 2.0L Turbo (272HP) / Type S 3.0L Turbo V6 (355HP SH-AWD).

Required Tool: Wrench set, New gaskets, Torque wrench
Recommended Parts & Testing Tools

Equipment for Diagnosing Acura TLX (P0420)

Prime Fast Delivery & Verified Fitment
Exhaust & Emissions Treatment

Cataclean Complete Engine & Catalytic Cleaner

4.5 / 5.0 (25,000+ Reviews)

Cleans catalytic converter, oxygen sensors, and fuel injectors to clear P0420/P0430 efficiency codes.

Sensor Signal Voltage Meter

AstroAI Auto-Ranging Digital Multimeter

4.6 / 5.0 (Best Seller)

Essential for testing 0.1V–5.0V sensor reference signals, ground continuity (<0.20Ω), and harness resistance.

$29.99 Prime
View on Amazon
Top Mobile OBD-II Scanner

BlueDriver Bluetooth Pro OBDII Scan Tool

4.7 / 5.0 (50,000+ Reviews)

Reads and clears enhanced codes (ABS, Airbag, Transmission, Engine) & live freeze-frame telemetry on phone.

Compare OEM & Aftermarket Replacement Sensors for Acura TLXVerified direct-fit pricing from Denso, Bosch, Motorcraft, and ACDelco on Amazon.
Find Parts on Amazon
* As an Amazon Associate, MazicBay earns from qualifying purchases. Prices & availability subject to change.

Other Common Fault Codes on Acura TLX

Frequently diagnosed powertrain, emissions, and sensor trouble codes logged on the Acura TLX:

4. Acura TLX P0420 FAQs

What causes code P0420 to trigger on a Acura TLX?

On the Acura TLX (2.0L Turbo (272HP) / Type S 3.0L Turbo V6 (355HP SH-AWD)), P0420 is most frequently caused by Catalytic converter internal substrate degraded or melted or Faulty Downstream Oxygen Sensor (O2 Sensor Bank 1 Sensor 2).

Where is the OBD-II port located on my Acura TLX?

On the Acura TLX, the 16-pin DLC diagnostic connector is located Driver footwell below steering column. Plug in any standard OBD-II scanner with the ignition in the ON position to read freeze-frame parameters.

Can I safely drive my Acura TLX with code P0420?

Yes for moderate distances, but vehicle will fail state emissions inspections. Given that P0420 carries a Medium severity rating, we advise avoiding heavy towing or aggressive throttle inputs until sensor readings are verified.