MazicBay Diagnostics
MAZICBAYDiagnostics
FTC Reader Disclosure: When you purchase or register through links on our site, we may earn an affiliate commission at no extra cost to you. Read our Editorial & Advertising Policy.

P0705 on Tesla: Symptoms, Causes & Fix

Transmission Range Sensor Circuit Malfunction (PRNDL Input)

Official technical diagnostic wire for fault code P0705 specifically affecting Tesla vehicles (Model 3, Model Y, Model S, Model X, Cybertruck).

Sensor Voltage Ref
0.1V – 5.0V Ref
Tesla Factory Standard
CAN Bus Speed
500 kbps CAN-FD
ISO 15765-4 Diagnostic Bus
Drivability Status
Drivable (Short Trip)
High urgency level
Est. Repair Cost
$120 - $450 (DIY: $40 - $160)
Parts & Labor DIY
Model-Specific Diagnostic Wires

Select Your Tesla Model for P0705:

5 Models Available

1. Common Symptoms on Tesla Vehicles

When Tesla Engine Control Modules (ECM) trigger fault code P0705, drivers typically report:

Check Engine Light on on Tesla Powertrains
Vehicle will not crank/start in Park (starts only in Neutral) on Tesla Powertrains
Gear indicator on dashboard (P R N D 1 2) is blank or displays wrong gear on Tesla Powertrains
Transmission shifts harshly or goes into 3rd gear limp mode on Tesla Powertrains
Reverse backup lights fail to illuminate on Tesla Powertrains

2. Root Causes on Tesla Engines

Historical diagnostic claims across Tesla engines point to the following failure distribution:

55%
Misaligned or faulty Transmission Range Sensor / Neutral Safety Switch (NSS) (Tesla OEM Part)
25%
Corroded or water-logged connector on transmission side (Tesla OEM Part)
12%
Stretched or misadjusted shift linkage cable (Tesla OEM Part)
8%
Broken internal switch contacts (Tesla OEM Part)

3. Step-by-Step Fix Protocol for Tesla

01
Check PRNDL Live Data

Move gear selector through all positions while monitoring scan tool TR PID to see which gear positions fail to register. on Tesla engines.

Required Tool: OBD-II Scanner
02
Inspect Shift Cable Alignment

Ensure the mechanical shift linkage fully clicks the transmission lever into the physical detent for Park and Neutral. on Tesla engines.

Required Tool: Pliers, Socket Set
03
Test Neutral Safety Switch Continuity

Use multimeter to check continuity across switch pins in Park, Reverse, Neutral, and Drive. on Tesla engines.

Required Tool: Digital Multimeter
04
Replace or Re-align Range Sensor

Loosen mounting bolts, use alignment pin to align sensor slot with transmission shaft in Neutral, torque bolts, or install new OEM sensor. on Tesla engines.

Required Tool: 10mm/12mm Sockets, Alignment Pin
05
Clear Trouble Codes and Verify Starting

Clear DTCs and confirm engine starts in Park and Neutral, reverse lights activate, and gear display is accurate. on Tesla engines.

Required Tool: OBD-II Scanner
Recommended Parts & Testing Tools

Equipment for Diagnosing Tesla (P0705)

Prime Fast Delivery & Verified Fitment
Direct-Fit Replacement Part

Tesla OEM Replacement Sensor

4.7 / 5.0 (Verified Fit)

Direct-fit replacement assembly engineered to OEM tolerances for Tesla.

$45 – $95 Prime
Check Fitment on Amazon
Sensor Signal Voltage Meter

AstroAI Auto-Ranging Digital Multimeter

4.6 / 5.0 (Best Seller)

Essential for testing 0.1V–5.0V sensor reference signals, ground continuity (<0.20Ω), and harness resistance.

$29.99 Prime
View on Amazon
Top Mobile OBD-II Scanner

BlueDriver Bluetooth Pro OBDII Scan Tool

4.7 / 5.0 (50,000+ Reviews)

Reads and clears enhanced codes (ABS, Airbag, Transmission, Engine) & live freeze-frame telemetry on phone.

Compare OEM & Aftermarket Replacement Sensors for TeslaVerified direct-fit pricing from Denso, Bosch, Motorcraft, and ACDelco on Amazon.
Find Parts on Amazon
* As an Amazon Associate, MazicBay earns from qualifying purchases. Prices & availability subject to change.

4. Tesla P0705 Frequently Asked Questions

What does code P0705 mean on a Tesla?

On Tesla vehicles, P0705 indicates that the Engine Control Module (ECM) detected transmission range sensor circuit malfunction (prndl input). This typically points to Misaligned or faulty Transmission Range Sensor / Neutral Safety Switch (NSS) or Corroded or water-logged connector on transmission side.

Can I continue driving my Tesla with code P0705?

Caution. Vehicle may not start in Park, backup lights may not work, and transmission may lock in Limp Mode. Because this code carries a High severity rating on Tesla powertrains, we recommend scanning live data values promptly to prevent secondary damage.

How much does it cost to fix code P0705 on a Tesla?

Estimated DIY parts cost ranges from $120 - $450 (DIY: $40 - $160), while professional shop repairs at an authorized Tesla dealership or independent specialist typically range from $180 to $380 including diagnostic labor.