MazicBay Diagnostics
MAZICBAYDiagnostics
FTC Reader Disclosure: When you purchase or register through links on our site, we may earn an affiliate commission at no extra cost to you. Read our Editorial & Advertising Policy.

B0091 on Nissan: Symptoms, Causes & Fix

Left Side Restraints Sensor 1

Official technical diagnostic wire for fault code B0091 specifically affecting Nissan vehicles (Altima, Rogue, Sentra, Pathfinder, Frontier).

Sensor Voltage Ref
0.1V – 5.0V Ref
Nissan Factory Standard
CAN Bus Speed
500 kbps CAN-FD
ISO 15765-4 Diagnostic Bus
Drivability Status
Drivable (Short Trip)
Critical urgency level
Est. Repair Cost
$150 - $450 (DIY: $60 - $180)
Parts & Labor DIY
Model-Specific Diagnostic Wires

Select Your Nissan Model for B0091:

6 Models Available

1. Common Symptoms on Nissan Vehicles

When Nissan Engine Control Modules (ECM) trigger fault code B0091, drivers typically report:

Supplemental Restraint System (SRS) / Airbag warning light illuminated on Nissan Powertrains
'Service Airbag' message on dashboard instrument cluster on Nissan Powertrains

2. Root Causes on Nissan Engines

Historical diagnostic claims across Nissan engines point to the following failure distribution:

55%
Corroded or damaged left side impact crash sensor (B-pillar or door sill) (Nissan OEM Part)
25%
Corroded wiring harness under driver seat / driver door sill (Nissan OEM Part)
12%
Loose or unseated yellow SRS connector plug (Nissan OEM Part)

3. Step-by-Step Fix Protocol for Nissan

01
Disconnect Vehicle Battery

Disconnect battery negative cable and wait 15 minutes to fully discharge SRS backup capacitors before touching airbag components. on Nissan engines.

Required Tool: 10mm Wrench
02
Locate Left Side Impact Sensor

Remove driver side door sill trim / lower B-pillar trim to access the yellow impact sensor. on Nissan engines.

Required Tool: Trim Removal Tools, Torx Set
03
Inspect Wiring & Sensor Housing

Inspect sensor for water corrosion or cracked plastic housing. on Nissan engines.

Required Tool: Flashlight
04
Replace Side Impact Sensor

Bolt new OEM side impact sensor into clean, rust-free ground location, torque bolt to spec, and click yellow locking connector firmly. on Nissan engines.

Required Tool: Torx T30 Socket, Torque Wrench
05
Reconnect Battery and Clear SRS Codes

Reconnect battery, clear SRS trouble codes with an airbag-capable scanner, and verify light turns off after 5-second bulb check. on Nissan engines.

Required Tool: SRS-Capable OBD-II Scanner
Recommended Parts & Testing Tools

Equipment for Diagnosing Nissan (B0091)

Prime Fast Delivery & Verified Fitment
Direct-Fit Replacement Part

Nissan OEM Replacement Sensor

4.7 / 5.0 (Verified Fit)

Direct-fit replacement assembly engineered to OEM tolerances for Nissan.

$45 – $95 Prime
Check Fitment on Amazon
Sensor Signal Voltage Meter

AstroAI Auto-Ranging Digital Multimeter

4.6 / 5.0 (Best Seller)

Essential for testing 0.1V–5.0V sensor reference signals, ground continuity (<0.20Ω), and harness resistance.

$29.99 Prime
View on Amazon
Top Mobile OBD-II Scanner

BlueDriver Bluetooth Pro OBDII Scan Tool

4.7 / 5.0 (50,000+ Reviews)

Reads and clears enhanced codes (ABS, Airbag, Transmission, Engine) & live freeze-frame telemetry on phone.

Compare OEM & Aftermarket Replacement Sensors for NissanVerified direct-fit pricing from Denso, Bosch, Motorcraft, and ACDelco on Amazon.
Find Parts on Amazon
* As an Amazon Associate, MazicBay earns from qualifying purchases. Prices & availability subject to change.

4. Nissan B0091 Frequently Asked Questions

What does code B0091 mean on a Nissan?

On Nissan vehicles, B0091 indicates that the Engine Control Module (ECM) detected left side restraints sensor 1. This typically points to Corroded or damaged left side impact crash sensor (B-pillar or door sill) or Corroded wiring harness under driver seat / driver door sill.

Can I continue driving my Nissan with code B0091?

Caution. Side curtain and seat airbag deployment may be disabled in a side-impact collision. Because this code carries a Critical severity rating on Nissan powertrains, we recommend scanning live data values promptly to prevent secondary damage.

How much does it cost to fix code B0091 on a Nissan?

Estimated DIY parts cost ranges from $150 - $450 (DIY: $60 - $180), while professional shop repairs at an authorized Nissan dealership or independent specialist typically range from $180 to $380 including diagnostic labor.