U0142 on Dodge: Symptoms, Causes & Fix
Official technical diagnostic wire for fault code U0142 specifically affecting Dodge vehicles (Charger, Challenger, Durango, Hornet, Journey).
Select Your Dodge Model for U0142:
1. Common Symptoms on Dodge Vehicles
When Dodge Engine Control Modules (ECM) trigger fault code U0142, drivers typically report:
2. Root Causes on Dodge Engines
Historical diagnostic claims across Dodge engines point to the following failure distribution:
3. Step-by-Step Fix Protocol for Dodge
Connect an OBD-II scan tool and record freeze frame sensor telemetry for code U0142 to note engine RPM, load, and voltage when the fault triggered. on Dodge engines.
Inspect the electrical connector and wiring harness related to U0142 for chafing, corrosion, moisture, or pin push-out. on Dodge engines.
Measure circuit voltage supply (12V B+ or 5V reference) and sensor/actuator resistance according to factory repair manual specifications. on Dodge engines.
Install a new OEM-grade replacement part, torque fasteners to factory spec, and ensure electrical locking tabs click firmly. on Dodge engines.
Clear all stored DTCs from vehicle memory and perform an OBD-II drive cycle to confirm the diagnostic monitor resets to 'Ready'. on Dodge engines.
Equipment for Diagnosing Dodge (U0142)
Dodge OEM Replacement Sensor
Direct-fit replacement assembly engineered to OEM tolerances for Dodge.
AstroAI Auto-Ranging Digital Multimeter
Essential for testing 0.1V–5.0V sensor reference signals, ground continuity (<0.20Ω), and harness resistance.
BlueDriver Bluetooth Pro OBDII Scan Tool
Reads and clears enhanced codes (ABS, Airbag, Transmission, Engine) & live freeze-frame telemetry on phone.
4. Dodge U0142 Frequently Asked Questions
What does code U0142 mean on a Dodge?
On Dodge vehicles, U0142 indicates that the Engine Control Module (ECM) detected lost communication with body control module b. This typically points to CAN bus communication break or Blown BCM fuse.
Can I continue driving my Dodge with code U0142?
Yes. Secondary body electronics offline. Because this code carries a Medium severity rating on Dodge powertrains, we recommend scanning live data values promptly to prevent secondary damage.
How much does it cost to fix code U0142 on a Dodge?
Estimated DIY parts cost ranges from $120 - $500, while professional shop repairs at an authorized Dodge dealership or independent specialist typically range from $180 to $380 including diagnostic labor.