MazicBay Diagnostics
MAZICBAYDiagnostics
FTC Reader Disclosure: When you purchase or register through links on our site, we may earn an affiliate commission at no extra cost to you. Read our Editorial & Advertising Policy.

P0404 on Dodge: Symptoms, Causes & Fix

Exhaust Gas Recirculation (EGR) Circuit Range/Performance

Official technical diagnostic wire for fault code P0404 specifically affecting Dodge vehicles (Charger, Challenger, Durango, Hornet, Journey).

Sensor Voltage Ref
0.1V – 5.0V Ref
Dodge Factory Standard
CAN Bus Speed
500 kbps CAN-FD
ISO 15765-4 Diagnostic Bus
Drivability Status
Not Recommended
Medium urgency level
Est. Repair Cost
$150 - $400 (DIY: $60 - $180)
Parts & Labor DIY
Model-Specific Diagnostic Wires

Select Your Dodge Model for P0404:

4 Models Available

1. Common Symptoms on Dodge Vehicles

When Dodge Engine Control Modules (ECM) trigger fault code P0404, drivers typically report:

Check Engine Light on on Dodge Powertrains
Intermittent rough idle on Dodge Powertrains
Slight hesitation when cruising on Dodge Powertrains
Failed emissions test on Dodge Powertrains

2. Root Causes on Dodge Engines

Historical diagnostic claims across Dodge engines point to the following failure distribution:

55%
Carbon deposits restricting linear EGR pintle movement (Dodge OEM Part)
25%
Worn internal EGR position feedback potentiometer (Dodge OEM Part)
12%
Wiring harness resistance or corroded connector pin (Dodge OEM Part)

3. Step-by-Step Fix Protocol for Dodge

01
Check EGR Position PID on Scanner

Compare commanded EGR percentage vs actual position voltage. on Dodge engines.

Required Tool: OBD-II Scanner
02
Clean EGR Pintle and Housing

Clean carbon buildup restricting valve stroke. on Dodge engines.

Required Tool: Carb Cleaner, Wire Brush
03
Replace Electronic EGR Valve

If potentiometer is worn out, install new OEM electronic EGR valve. on Dodge engines.

Required Tool: Socket Set, New Gasket
04
Clear Codes and Road Test

Clear DTCs and complete an EGR monitor drive cycle. on Dodge engines.

Required Tool: OBD-II Scanner
Recommended Parts & Testing Tools

Equipment for Diagnosing Dodge (P0404)

Prime Fast Delivery & Verified Fitment
Direct-Fit Replacement Part

Dodge OEM Replacement Sensor

4.7 / 5.0 (Verified Fit)

Direct-fit replacement assembly engineered to OEM tolerances for Dodge.

$45 – $95 Prime
Check Fitment on Amazon
Sensor Signal Voltage Meter

AstroAI Auto-Ranging Digital Multimeter

4.6 / 5.0 (Best Seller)

Essential for testing 0.1V–5.0V sensor reference signals, ground continuity (<0.20Ω), and harness resistance.

$29.99 Prime
View on Amazon
Top Mobile OBD-II Scanner

BlueDriver Bluetooth Pro OBDII Scan Tool

4.7 / 5.0 (50,000+ Reviews)

Reads and clears enhanced codes (ABS, Airbag, Transmission, Engine) & live freeze-frame telemetry on phone.

Compare OEM & Aftermarket Replacement Sensors for DodgeVerified direct-fit pricing from Denso, Bosch, Motorcraft, and ACDelco on Amazon.
Find Parts on Amazon
* As an Amazon Associate, MazicBay earns from qualifying purchases. Prices & availability subject to change.

4. Dodge P0404 Frequently Asked Questions

What does code P0404 mean on a Dodge?

On Dodge vehicles, P0404 indicates that the Engine Control Module (ECM) detected exhaust gas recirculation (egr) circuit range/performance. This typically points to Carbon deposits restricting linear EGR pintle movement or Worn internal EGR position feedback potentiometer.

Can I continue driving my Dodge with code P0404?

Yes. Normal drivability is maintained in most conditions. Because this code carries a Medium severity rating on Dodge powertrains, we recommend scanning live data values promptly to prevent secondary damage.

How much does it cost to fix code P0404 on a Dodge?

Estimated DIY parts cost ranges from $150 - $400 (DIY: $60 - $180), while professional shop repairs at an authorized Dodge dealership or independent specialist typically range from $180 to $380 including diagnostic labor.