P0218 on RAM: Symptoms, Causes & Fix
Official technical diagnostic wire for fault code P0218 specifically affecting RAM vehicles (1500, 2500, 3500, TRX).
Select Your RAM Model for P0218:
1. Common Symptoms on RAM Vehicles
When RAM Engine Control Modules (ECM) trigger fault code P0218, drivers typically report:
2. Root Causes on RAM Engines
Historical diagnostic claims across RAM engines point to the following failure distribution:
3. Step-by-Step Fix Protocol for RAM
Safely park, leave engine idling in Park for 5 minutes to let transmission cooler lower fluid temperature. on RAM engines.
Check dipstick with engine at warm idle. If fluid is dark brown/black or smells burnt, it must be drained and replaced. on RAM engines.
Check front auxiliary transmission cooler for mud, bugs, or bent fins restricting airflow. on RAM engines.
Drop transmission pan, replace internal filter, clean magnet, install new pan gasket, and refill with OEM synthetic transmission fluid. on RAM engines.
Clear DTCs and monitor Transmission Fluid Temperature PID on scanner (normal operating range: 175°F–200°F). on RAM engines.
Equipment for Diagnosing RAM (P0218)
RAM OEM Replacement Sensor
Direct-fit replacement assembly engineered to OEM tolerances for RAM.
AstroAI Auto-Ranging Digital Multimeter
Essential for testing 0.1V–5.0V sensor reference signals, ground continuity (<0.20Ω), and harness resistance.
BlueDriver Bluetooth Pro OBDII Scan Tool
Reads and clears enhanced codes (ABS, Airbag, Transmission, Engine) & live freeze-frame telemetry on phone.
4. RAM P0218 Frequently Asked Questions
What does code P0218 mean on a RAM?
On RAM vehicles, P0218 indicates that the Engine Control Module (ECM) detected transmission fluid overtemperature condition. This typically points to Severe towing or hauling exceeding vehicle GCWR rating or Low or burnt transmission fluid.
Can I continue driving my RAM with code P0218?
No. Pull over and allow transmission to cool immediately. Overheating transmission fluid (>260°F) burns clutches and destroys seals. Because this code carries a Critical severity rating on RAM powertrains, we recommend scanning live data values promptly to prevent secondary damage.
How much does it cost to fix code P0218 on a RAM?
Estimated DIY parts cost ranges from $180 - $2,500 (DIY: $60 - $200), while professional shop repairs at an authorized RAM dealership or independent specialist typically range from $180 to $380 including diagnostic labor.