MazicBay Diagnostics
MAZICBAYDiagnostics
FTC Reader Disclosure: When you purchase or register through links on our site, we may earn an affiliate commission at no extra cost to you. Read our Editorial & Advertising Policy.

P0402 on Nissan: Symptoms, Causes & Fix

Exhaust Gas Recirculation (EGR) Flow Excessive Detected

Official technical diagnostic wire for fault code P0402 specifically affecting Nissan vehicles (Altima, Rogue, Sentra, Pathfinder, Frontier).

Sensor Voltage Ref
0.1V – 5.0V Ref
Nissan Factory Standard
CAN Bus Speed
500 kbps CAN-FD
ISO 15765-4 Diagnostic Bus
Drivability Status
Drivable (Short Trip)
Medium urgency level
Est. Repair Cost
$120 - $400
Parts & Labor DIY
Model-Specific Diagnostic Wires

Select Your Nissan Model for P0402:

6 Models Available

1. Common Symptoms on Nissan Vehicles

When Nissan Engine Control Modules (ECM) trigger fault code P0402, drivers typically report:

Engine stalls when slowing down or idling on Nissan Powertrains
Rough stumbling idle on Nissan Powertrains
Check Engine Light on on Nissan Powertrains

2. Root Causes on Nissan Engines

Historical diagnostic claims across Nissan engines point to the following failure distribution:

55%
EGR valve stuck permanently open with carbon (Nissan OEM Part)
25%
Faulty EGR vacuum solenoid (Nissan OEM Part)
12%
Defective DPFE sensor (Nissan OEM Part)

3. Step-by-Step Fix Protocol for Nissan

01
Scan and Record Freeze Frame Telemetry

Connect an OBD-II scan tool and record freeze frame sensor telemetry for code P0402 to note engine RPM, load, and voltage when the fault triggered. on Nissan engines.

Required Tool: OBD-II Scanner
02
Inspect Related Wiring Harness & Connectors

Inspect the electrical connector and wiring harness related to P0402 for chafing, corrosion, moisture, or pin push-out. on Nissan engines.

Required Tool: Flashlight, Multimeter
03
Test Component Resistance & Voltage Supply

Measure circuit voltage supply (12V B+ or 5V reference) and sensor/actuator resistance according to factory repair manual specifications. on Nissan engines.

Required Tool: Digital Multimeter
04
Replace Defective Component

Install a new OEM-grade replacement part, torque fasteners to factory spec, and ensure electrical locking tabs click firmly. on Nissan engines.

Required Tool: Hand Tool Socket Set, Torque Wrench
05
Clear Trouble Codes & Complete Drive Cycle

Clear all stored DTCs from vehicle memory and perform an OBD-II drive cycle to confirm the diagnostic monitor resets to 'Ready'. on Nissan engines.

Required Tool: OBD-II Scanner
Recommended Parts & Testing Tools

Equipment for Diagnosing Nissan (P0402)

Prime Fast Delivery & Verified Fitment
Direct-Fit Replacement Part

Nissan OEM Replacement Sensor

4.7 / 5.0 (Verified Fit)

Direct-fit replacement assembly engineered to OEM tolerances for Nissan.

$45 – $95 Prime
Check Fitment on Amazon
Sensor Signal Voltage Meter

AstroAI Auto-Ranging Digital Multimeter

4.6 / 5.0 (Best Seller)

Essential for testing 0.1V–5.0V sensor reference signals, ground continuity (<0.20Ω), and harness resistance.

$29.99 Prime
View on Amazon
Top Mobile OBD-II Scanner

BlueDriver Bluetooth Pro OBDII Scan Tool

4.7 / 5.0 (50,000+ Reviews)

Reads and clears enhanced codes (ABS, Airbag, Transmission, Engine) & live freeze-frame telemetry on phone.

Compare OEM & Aftermarket Replacement Sensors for NissanVerified direct-fit pricing from Denso, Bosch, Motorcraft, and ACDelco on Amazon.
Find Parts on Amazon
* As an Amazon Associate, MazicBay earns from qualifying purchases. Prices & availability subject to change.

4. Nissan P0402 Frequently Asked Questions

What does code P0402 mean on a Nissan?

On Nissan vehicles, P0402 indicates that the Engine Control Module (ECM) detected exhaust gas recirculation (egr) flow excessive detected. This typically points to EGR valve stuck permanently open with carbon or Faulty EGR vacuum solenoid.

Can I continue driving my Nissan with code P0402?

Caution. Engine will stumble, buck, and stall at low RPMs. Because this code carries a Medium severity rating on Nissan powertrains, we recommend scanning live data values promptly to prevent secondary damage.

How much does it cost to fix code P0402 on a Nissan?

Estimated DIY parts cost ranges from $120 - $400, while professional shop repairs at an authorized Nissan dealership or independent specialist typically range from $180 to $380 including diagnostic labor.