MazicBay Diagnostics
MAZICBAYDiagnostics
FTC Reader Disclosure: When you purchase or register through links on our site, we may earn an affiliate commission at no extra cost to you. Read our Editorial & Advertising Policy.

P0316 on Nissan: Symptoms, Causes & Fix

Engine Misfire Detected on Startup (First 1000 Revolutions)

Official technical diagnostic wire for fault code P0316 specifically affecting Nissan vehicles (Altima, Rogue, Sentra, Pathfinder, Frontier).

Sensor Voltage Ref
0.1V – 5.0V Ref
Nissan Factory Standard
CAN Bus Speed
500 kbps CAN-FD
ISO 15765-4 Diagnostic Bus
Drivability Status
Drivable (Short Trip)
High urgency level
Est. Repair Cost
$100 - $600 (DIY: $30 - $150)
Parts & Labor DIY
Model-Specific Diagnostic Wires

Select Your Nissan Model for P0316:

6 Models Available

1. Common Symptoms on Nissan Vehicles

When Nissan Engine Control Modules (ECM) trigger fault code P0316, drivers typically report:

Check Engine Light on on Nissan Powertrains
Engine shakes, sputters, and runs very rough immediately after cold start on Nissan Powertrains
Engine smooths out and runs normally after warming up for 1–2 minutes on Nissan Powertrains
Accompanying misfire codes (P0300, P0301-P0308) on Nissan Powertrains

2. Root Causes on Nissan Engines

Historical diagnostic claims across Nissan engines point to the following failure distribution:

55%
Coolant leaking into cylinder overnight from failing head gasket or intake manifold (Nissan OEM Part)
25%
Leaking fuel injector dripping fuel into cylinder while parked (Nissan OEM Part)
12%
Worn spark plugs with excessive gap or moisture on ignition boots (Nissan OEM Part)
8%
Carbon buildup on intake valves preventing cold fuel vaporization (Nissan OEM Part)

3. Step-by-Step Fix Protocol for Nissan

01
Check Accompanying Cylinder Misfire Code

Check if P0316 is accompanied by a specific cylinder code (like P0303) to isolate which cylinder is misfiring on startup. on Nissan engines.

Required Tool: OBD-II Scanner
02
Perform Cooling System Pressure Test

Pressurize cold cooling system to 15 PSI. Use a borescope camera through spark plug hole to check for coolant pool on piston top. on Nissan engines.

Required Tool: Cooling System Pressure Tester, Borescope Camera
03
Inspect Spark Plugs and Coils

Remove spark plugs. Check for white coolant crust, fuel fouling, or cracked ceramic insulators. on Nissan engines.

Required Tool: Spark Plug Socket, Ratchet
04
Perform Intake Valve Carbon Cleaning

On direct-injection engines, perform walnut shell blasting or chemical intake valve cleaning to remove cold carbon buildup. on Nissan engines.

Required Tool: Intake Valve Cleaner Kit
05
Clear Trouble Codes and Test Overnight Cold Start

Clear DTCs and allow vehicle to sit overnight to confirm morning start is clean. on Nissan engines.

Required Tool: OBD-II Scanner
Recommended Parts & Testing Tools

Equipment for Diagnosing Nissan (P0316)

Prime Fast Delivery & Verified Fitment
Direct-Fit Replacement Part

Nissan OEM Replacement Sensor

4.7 / 5.0 (Verified Fit)

Direct-fit replacement assembly engineered to OEM tolerances for Nissan.

$45 – $95 Prime
Check Fitment on Amazon
Sensor Signal Voltage Meter

AstroAI Auto-Ranging Digital Multimeter

4.6 / 5.0 (Best Seller)

Essential for testing 0.1V–5.0V sensor reference signals, ground continuity (<0.20Ω), and harness resistance.

$29.99 Prime
View on Amazon
Top Mobile OBD-II Scanner

BlueDriver Bluetooth Pro OBDII Scan Tool

4.7 / 5.0 (50,000+ Reviews)

Reads and clears enhanced codes (ABS, Airbag, Transmission, Engine) & live freeze-frame telemetry on phone.

Compare OEM & Aftermarket Replacement Sensors for NissanVerified direct-fit pricing from Denso, Bosch, Motorcraft, and ACDelco on Amazon.
Find Parts on Amazon
* As an Amazon Associate, MazicBay earns from qualifying purchases. Prices & availability subject to change.

4. Nissan P0316 Frequently Asked Questions

What does code P0316 mean on a Nissan?

On Nissan vehicles, P0316 indicates that the Engine Control Module (ECM) detected engine misfire detected on startup (first 1000 revolutions). This typically points to Coolant leaking into cylinder overnight from failing head gasket or intake manifold or Leaking fuel injector dripping fuel into cylinder while parked.

Can I continue driving my Nissan with code P0316?

Caution. Engine misfires heavily for the first 30–60 seconds after starting, then smooths out. Because this code carries a High severity rating on Nissan powertrains, we recommend scanning live data values promptly to prevent secondary damage.

How much does it cost to fix code P0316 on a Nissan?

Estimated DIY parts cost ranges from $100 - $600 (DIY: $30 - $150), while professional shop repairs at an authorized Nissan dealership or independent specialist typically range from $180 to $380 including diagnostic labor.