MazicBay Diagnostics
MAZICBAYDiagnostics
FTC Reader Disclosure: When you purchase or register through links on our site, we may earn an affiliate commission at no extra cost to you. Read our Editorial & Advertising Policy.

P0204 on Nissan: Symptoms, Causes & Fix

Injector Circuit Malfunction - Cylinder 4

Official technical diagnostic wire for fault code P0204 specifically affecting Nissan vehicles (Altima, Rogue, Sentra, Pathfinder, Frontier).

Sensor Voltage Ref
0.1V – 5.0V Ref
Nissan Factory Standard
CAN Bus Speed
500 kbps CAN-FD
ISO 15765-4 Diagnostic Bus
Drivability Status
Not Recommended
Critical urgency level
Est. Repair Cost
$150 - $550 (DIY: $40 - $180)
Parts & Labor DIY
Model-Specific Diagnostic Wires

Select Your Nissan Model for P0204:

6 Models Available

1. Common Symptoms on Nissan Vehicles

When Nissan Engine Control Modules (ECM) trigger fault code P0204, drivers typically report:

Flashing CEL on Nissan Powertrains
Engine vibration and sputtering on Nissan Powertrains
Sluggish acceleration on Nissan Powertrains
P0304 code on Nissan Powertrains

2. Root Causes on Nissan Engines

Historical diagnostic claims across Nissan engines point to the following failure distribution:

55%
Faulty Cylinder 4 fuel injector (Nissan OEM Part)
25%
Broken wiring harness (Nissan OEM Part)
12%
Loose connector lock (Nissan OEM Part)
8%
ECM driver fault (Nissan OEM Part)

3. Step-by-Step Fix Protocol for Nissan

01
Check Injector 4 Resistance

Measure resistance across pins (12–16 ohms). on Nissan engines.

Required Tool: Multimeter
02
Verify Signal with Noid Light

Check that ECM pulse reaches the connector. on Nissan engines.

Required Tool: Noid Light
03
Replace Cylinder 4 Injector

Replace the faulty injector with OEM unit. on Nissan engines.

Required Tool: Socket Set, O-ring Lube
04
Clear Codes and Test

Clear DTC memory and confirm smooth operation. on Nissan engines.

Required Tool: OBD-II Scanner
Recommended Parts & Testing Tools

Equipment for Diagnosing Nissan (P0204)

Prime Fast Delivery & Verified Fitment
Direct-Fit Replacement Part

Nissan OEM Replacement Sensor

4.7 / 5.0 (Verified Fit)

Direct-fit replacement assembly engineered to OEM tolerances for Nissan.

$45 – $95 Prime
Check Fitment on Amazon
Sensor Signal Voltage Meter

AstroAI Auto-Ranging Digital Multimeter

4.6 / 5.0 (Best Seller)

Essential for testing 0.1V–5.0V sensor reference signals, ground continuity (<0.20Ω), and harness resistance.

$29.99 Prime
View on Amazon
Top Mobile OBD-II Scanner

BlueDriver Bluetooth Pro OBDII Scan Tool

4.7 / 5.0 (50,000+ Reviews)

Reads and clears enhanced codes (ABS, Airbag, Transmission, Engine) & live freeze-frame telemetry on phone.

Compare OEM & Aftermarket Replacement Sensors for NissanVerified direct-fit pricing from Denso, Bosch, Motorcraft, and ACDelco on Amazon.
Find Parts on Amazon
* As an Amazon Associate, MazicBay earns from qualifying purchases. Prices & availability subject to change.

4. Nissan P0204 Frequently Asked Questions

What does code P0204 mean on a Nissan?

On Nissan vehicles, P0204 indicates that the Engine Control Module (ECM) detected injector circuit malfunction - cylinder 4. This typically points to Faulty Cylinder 4 fuel injector or Broken wiring harness.

Can I continue driving my Nissan with code P0204?

No. Cylinder 4 is disabled, causing rough running and unburned fuel delivery issues. Because this code carries a Critical severity rating on Nissan powertrains, we recommend scanning live data values promptly to prevent secondary damage.

How much does it cost to fix code P0204 on a Nissan?

Estimated DIY parts cost ranges from $150 - $550 (DIY: $40 - $180), while professional shop repairs at an authorized Nissan dealership or independent specialist typically range from $180 to $380 including diagnostic labor.