U0073 on Chrysler: Symptoms, Causes & Fix
Official technical diagnostic wire for fault code U0073 specifically affecting Chrysler vehicles (Pacifica, Pacifica Hybrid, 300, Voyager).
Select Your Chrysler Model for U0073:
1. Common Symptoms on Chrysler Vehicles
When Chrysler Engine Control Modules (ECM) trigger fault code U0073, drivers typically report:
2. Root Causes on Chrysler Engines
Historical diagnostic claims across Chrysler engines point to the following failure distribution:
3. Step-by-Step Fix Protocol for Chrysler
Remove any aftermarket insurance dongles, GPS trackers, or scan tools plugged into the DLC port. on Chrysler engines.
Inspect braided ground straps on engine and transmission. Clean all contact surfaces to bare metal. on Chrysler engines.
Scan all modules on vehicle. Note which modules are online and which are offline to pinpoint the break in the network daisy-chain. on Chrysler engines.
Verify 60 ohms across Pins 6 and 14 with battery disconnected. on Chrysler engines.
Clear DTCs from all modules and road test to verify error-free network transmission. on Chrysler engines.
Equipment for Diagnosing Chrysler (U0073)
Chrysler OEM Replacement Sensor
Direct-fit replacement assembly engineered to OEM tolerances for Chrysler.
AstroAI Auto-Ranging Digital Multimeter
Essential for testing 0.1V–5.0V sensor reference signals, ground continuity (<0.20Ω), and harness resistance.
BlueDriver Bluetooth Pro OBDII Scan Tool
Reads and clears enhanced codes (ABS, Airbag, Transmission, Engine) & live freeze-frame telemetry on phone.
4. Chrysler U0073 Frequently Asked Questions
What does code U0073 mean on a Chrysler?
On Chrysler vehicles, U0073 indicates that the Engine Control Module (ECM) detected control module communication bus a off. This typically points to Loose or corroded ground connection on transmission or frame or Faulty Transmission Control Module (TCM) or ABS module pulling bus down.
Can I continue driving my Chrysler with code U0073?
No. Bus is shut down due to excessive transmission errors, leaving vehicle in unpredictable limp mode. Because this code carries a Critical severity rating on Chrysler powertrains, we recommend scanning live data values promptly to prevent secondary damage.
How much does it cost to fix code U0073 on a Chrysler?
Estimated DIY parts cost ranges from $150 - $850 (DIY: $40 - $200), while professional shop repairs at an authorized Chrysler dealership or independent specialist typically range from $180 to $380 including diagnostic labor.