P0443 on Chrysler: Symptoms, Causes & Fix
Official technical diagnostic wire for fault code P0443 specifically affecting Chrysler vehicles (Pacifica, Pacifica Hybrid, 300, Voyager).
Select Your Chrysler Model for P0443:
1. Common Symptoms on Chrysler Vehicles
When Chrysler Engine Control Modules (ECM) trigger fault code P0443, drivers typically report:
2. Root Causes on Chrysler Engines
Historical diagnostic claims across Chrysler engines point to the following failure distribution:
3. Step-by-Step Fix Protocol for Chrysler
Find the purge valve mounted on the intake manifold with one vacuum line leading to the intake and one to the charcoal canister. on Chrysler engines.
Unplug 2-pin connector and measure resistance across terminals with multimeter. Typical spec is 14–30 ohms. If open (OL) or shorted (0 ohms), solenoid is dead. on Chrysler engines.
Remove purge valve and blow into it. A healthy de-energized purge valve should be 100% sealed. If air passes through, the internal seal is stuck open. on Chrysler engines.
Disconnect quick-release vapor lines, unbolt mounting bracket, snap new OEM purge valve into place, and reconnect electrical plug. on Chrysler engines.
Clear DTCs with scanner and verify EVAP monitor completes. on Chrysler engines.
Equipment for Diagnosing Chrysler (P0443)
OEM Tethered Fuel Gas Cap with O-Ring
Tight-sealing factory fuel cap resolves common EVAP small/large leak codes without workshop visits.
AstroAI Auto-Ranging Digital Multimeter
Essential for testing 0.1V–5.0V sensor reference signals, ground continuity (<0.20Ω), and harness resistance.
BlueDriver Bluetooth Pro OBDII Scan Tool
Reads and clears enhanced codes (ABS, Airbag, Transmission, Engine) & live freeze-frame telemetry on phone.
4. Chrysler P0443 Frequently Asked Questions
What does code P0443 mean on a Chrysler?
On Chrysler vehicles, P0443 indicates that the Engine Control Module (ECM) detected evap system purge control valve circuit malfunction. This typically points to Failed EVAP purge solenoid coil (open or shorted internally) or Broken or frayed wiring harness to purge valve connector.
Can I continue driving my Chrysler with code P0443?
Yes. Safe to drive, but engine may experience hard starting after refueling at gas station. Because this code carries a Medium severity rating on Chrysler powertrains, we recommend scanning live data values promptly to prevent secondary damage.
How much does it cost to fix code P0443 on a Chrysler?
Estimated DIY parts cost ranges from $90 - $250 (DIY: $25 - $70), while professional shop repairs at an authorized Chrysler dealership or independent specialist typically range from $180 to $380 including diagnostic labor.