P0137 on Chrysler: Symptoms, Causes & Fix
Official technical diagnostic wire for fault code P0137 specifically affecting Chrysler vehicles (Pacifica, Pacifica Hybrid, 300, Voyager).
Select Your Chrysler Model for P0137:
1. Common Symptoms on Chrysler Vehicles
When Chrysler Engine Control Modules (ECM) trigger fault code P0137, drivers typically report:
2. Root Causes on Chrysler Engines
Historical diagnostic claims across Chrysler engines point to the following failure distribution:
3. Step-by-Step Fix Protocol for Chrysler
Listen for exhaust ticking or black soot around flex pipe, flanges, and sensor bungs before the catalytic converter. on Chrysler engines.
Monitor B1S2 voltage. Snap the throttle to enrich mixture; voltage should briefly spike above 0.8V. If it remains 0.0V–0.1V, sensor is defective or shorted. on Chrysler engines.
Unplug harness, remove old sensor with 7/8 socket, install replacement sensor and plug firmly. on Chrysler engines.
Clear DTCs and verify B1S2 holds steady between 0.45V and 0.75V during steady highway cruising. on Chrysler engines.
Equipment for Diagnosing Chrysler (P0137)
Chrysler OEM Replacement Sensor
Direct-fit replacement assembly engineered to OEM tolerances for Chrysler.
AstroAI Auto-Ranging Digital Multimeter
Essential for testing 0.1V–5.0V sensor reference signals, ground continuity (<0.20Ω), and harness resistance.
BlueDriver Bluetooth Pro OBDII Scan Tool
Reads and clears enhanced codes (ABS, Airbag, Transmission, Engine) & live freeze-frame telemetry on phone.
4. Chrysler P0137 Frequently Asked Questions
What does code P0137 mean on a Chrysler?
On Chrysler vehicles, P0137 indicates that the Engine Control Module (ECM) detected o2 sensor circuit low voltage (bank 1 sensor 2). This typically points to Exhaust leak upstream of or directly at the Sensor 2 bung letting in fresh air or Faulty downstream oxygen sensor.
Can I continue driving my Chrysler with code P0137?
Yes. Vehicle is fully drivable, but Check Engine Light will remain illuminated. Because this code carries a Low severity rating on Chrysler powertrains, we recommend scanning live data values promptly to prevent secondary damage.
How much does it cost to fix code P0137 on a Chrysler?
Estimated DIY parts cost ranges from $100 - $300 (DIY: $35 - $100), while professional shop repairs at an authorized Chrysler dealership or independent specialist typically range from $180 to $380 including diagnostic labor.